Tank Adaptors & Filters.

-Autopot FlexiTank Tap:
An Autopot FlexiTank Tap comes in handy when you are planning or building an Autopot system and would like use a Click Fit Tank Adapter/Filter to run a trunk feeding line to multiple Autopot sets. These taps also serve to replace old, worn-out FlexiTank Taps.

The tap fits through the ready-made holes in both the FlexiTank and FlexiTank Pro ranges and includes 2 rubber washer seals that are hand-tightened to each side of the reservoir with the provided plastic nut. The tap can also be installed into any other suitable water reservoir through which the correct sized hole (26mm) can drilled to fit the tap. Hard plastic industrial drums are often use as water reservoirs when building hydroponic systems. When considering such a container, make sure that the plastic will not let sunlight through its walls. If sunlight penetrates into the nutrient solution, algae will start growing inside of it, causing nutrient depletion and Oxygen loss in the solution.

The outlet side of the Autopot FlexiTank Tap is threaded and fitted with a 26.5mm click connector, to which a Click Fit Tank Adapter/Filter can be fitted. Autopot piping (16mm) or irrigation piping (12mm) can then be connected to feed the Autopots in the system.

-Autopot 16mm Click Fit Tank Adaptor & Filter:
The 16mm Click Fit Adapter and Filter is designed to be used with all sizes of FlexiTank and FlexiTank Pro. It is simply pushed onto the tap provided. It has a 13mm filter incorporated along its length to filter the water before it travels along the pipes. This fitting allows the user to push 16mm pipe, (Hosepipe) onto the end of the adapter.

-Autopot 16mm-6mm Click Fit Tank Adaptor & Filter:
The 16-6mm Click Fit Adapter and Filter is designed to be used with all sizes of FlexiTank and FlexiTank Pro. It is simply pushed onto the tap provided. It has a 13mm filter incorporated along its length to filter the water before it travels along the pipes. This fitting allows the user to push 6mm pipe onto the end of the adapter.

-Autopot 16mm-9mm Click-Fit Tank Adaptor & Filter:
The 16-9mm Click Fit Adapter and Filter is designed to be used with all sizes of FlexiTank and FlexiTank Pro. It is simply pushed onto the tap provided. It has a 13mm filter incorporated along its length to filter the water before it travels along the pipes. This fitting allows the user to push 9mm pipe onto the end of the adapter.

-Autopot 16mm Inline Filter:
With the AutoPot 16 mm In-Line FilterYou can easily prevent contamination of your indoor grow's watering system. The filter element may be removed from the in-line filter with ease because it has screw caps on both ends.

-Autopot 9mm Golf Filter Complete:
The 9mm Golf Filter is for use with 30 L & 47 L plastic reservoirs. It is inserted into the pipe end inside the reservoir once the pipe is pushed through the Top Hat Grommet. It can be easily serviced and will float to the top if it comes detached from the tube, this will not happen if you make sure you have pushed the filter firmly into the tube.

-Autopot 16mm-6mm In-line Filter:
16mm-6mm in-line filter allows easy connection to 16mm pipe. The filter is then reduced to 6mm (original Aquavalve hose size) and can be easily connected to any 1-6 module AutoPot irrigation system. The faucet also features an easily accessible internal filter for easy cleaning.

-Autopot 16mm-9mm In-Line Filter:
16mm-9mm in-line filter allows easy connection to 16mm pipes. The filter is then scaled down to 9mm (Aquavalve 5.0 hose size) for easy connection to any 1-6 module AutoPot irrigation system. The faucet also features an easily accessible internal filter for easy cleaning.

Looking for a Autopot Tank Adaptors & Filters for your beginner or pro set up? Visit Skyline Vape & Smoke Lounge today, or check out our online store for more. 

We Don't Just Ship to Johannesburg, Cape town & Durban we ship Nationwide Anywhere in South Africa